The COBRA 18R is an 18-cue wireless pyrotechnic firing system best fit for small to medium sized firework shows, specialty applications within large shows, and special effects.

 

Cobra18R Wireless Firing System £310

 

 

COBRA18 Firing System - Full Demo (1 of 2)

COBRA18 Firing System - Full Demo (2 of 2)

 

Multi-channel firing - With 100 channels, you can fire up to 1,800 unique cues with a single remote using individual, step or sequence firing methods. Set multiple modules to the same channel to fire at the same time. 

 

Easy to use - Intuitive and ergonomic design allows for rapid learning. Back-lit keypad controls are easy to view in night conditions. 

 

Solid construction - Innovative weather resistant design protects against the elements. Protective accessories such as the boot and armoured case can handle the harshest of conditions. 

 

SafeSense™ Technology - FCC, CE and IC certified, SafeSense™ includes four layers of proprietary security checks to stop interference in its tracks. 

 

Power packed - Fire up to 10 series wired or 4 parallel wired e-matches per cue. Also fires both consumer and home-made igniter clips. 

 

Fire up to 1,800 unique cues from a single remote

 

Easily set modules to one of 100 channels. Modules can also share the same channel for mirrored effects. Simply change the channel on the remote to firing modules set to the same channel.

 

Cobra18R User Guide

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cobra Wireless Field Module £180    

 

Features

Strong

2.5mm impact resistant ABS shell with optional Silicone Boot and Rugged Case.

Small and Light

205 x 160 x 40 mm @ 0.7Kg including batteries.

Water Resistant

Custom silicone rubber seals around terminals and minimal holes in case.

Reliable

Designed in the USA to meet the requirements of both serious amateurs and professionals.

Expandable

Add more Field Modules for a maximum of 1800 individual cues.

Secure

2.4 GHz SafeSense™ technology for security, reliable communications.

Safe

Key arming on both the Remote Control and Field Module.

Long Range

Over 300 m direct line of sight range and internal Signal Strength meter.

Easy Power Supply

3 x PP3 9v batteries with internal battery meter.

Powerful

3 Amps @ 18 Volts to fire

 

10 series connected / 4 parallel connected E-Match igniters per cue.

1 * series connected / 4 parallel connected Talon igniters per cue.

talon igniters can burn out at different rates. We do not recommend using talon igniters in series.

1 Solar Flare igniter per cue.

 

Same Time" Sequencer

0.1 - 99s variable delay between all cues.

Sub Sequencer

Can fire selected cues in Sequencer - Cue 5 - 10.

3 Modes of Operation

Single Fire, Step Fire, Sequence Fire.

Modular

User replaceable firing terminals.

 

Technical

Model: COBRA18M 

Number of Cues:  18 per module 

Unique Channels:  Set to 1 of 100 channels (00-99)

Multiple firing modules can be set to same channel 

Battery Requirements:  Single 9v battery powers system operations

6+ hours active operation

24+ hours idle (sleep-mode) operation

 

Double 9v batteries fire cues (18 Volts, 3 Amps) 

Max E-matches / igniter clips per cue: 

feet wire          max series           max parallel

     50                       10                             4

    100                      9                               3

     250                     8                               3

     500                     6                               2

assumes 22 gauge shooting wire.

firing consumer igniter clips in series is generally not recommended due to varied resistance and inability for all clips to fire simultaneously.

Dimensions:  Inches: 8.24" x 6.47" x 1.65"

Centimeters: 20.94cm x 16.42cm x 4.12cm 

Material / Construction:  2.5mm thick high strength ABS

"Hot-swap" replaceable 6-cue terminal strips

PU-coated Silicon backlit keypads

HumiSeal® PCB "gel" conformal coating

Gold-plated electronic PCB traces

Dust and moisture resistant design 

Radio Communications:  Contains FCC (ID: W7Z-ICP0), CE, IC certified RF module

California Eastern Labs (CEL) 802.15.4 RF Transceiver

2.405GHz - 2.48GHz Spread Spectrum

20 dBm (100mW) Tx Power Output

+5dBm 8.5" rubber duck antenna 

 

 

Cobra18R Remote Control £130

 

Features

Strong

2.5mm impact resistant ABS shell.

Small and Light

115 x 210 x 40 mm @ 0.5 Kg including batteries.

Water Resistant

Silicone rubber keypad resists water and clear case minimises number of holes in front panel.

Reliable

Designed in the USA to meet the requirements of both serious amateurs and professionals.

Expandable

Add up to 100 Field Modules for a maximum of 1800 individual cues.

Secure

2.4 GHz SafeSense™ technology for secure, reliable communications.

Safe

Key arming on both the Remote Control and Field Module.

Long Range

Over 300 m direct line of sight range and internal Signal Strength meter.

Bi-Direction Communication

Check continuity of cues and if Field Module is in range.

Powerful

Full control of each Field Module including remote ARM / DISARM and continuity check.

Easy Power Supply

3 x AA batteries with internal battery meter.

Ergonomic

Large rubber buttons and easy 1 or 2 handed operation.

Backlight

Backlit keypad and bright display for use in day or night conditions.

3 Modes of Operation

Single Fire, Step Fire, Sequence Fire.

 

Technical

Model: COBRA18R 

Channels / Unique Cues:  100 Channels (00-99), 1,800 Unique Cues 

Firing Methods:  Manual, Step, and Sequence (0.1 - 99s fixed delay) 

Range:  300m+ direct line of site 

Dimensions:  Inches: 8.2" x 4.05" x 1.65"

Centimeters: 20.8cm x 10.3cm x 4.12cm 

Material / Construction:  2.5mm thick high strength ABS

PU-coated Silicon backlit keypads

HumiSeal® PCB "gel" conformal coating

Gold-plated electronic PCB traces

Dust and moisture resistant design 

Radio Communications:  Contains FCC (ID: W7Z-ICP0), CE, IC certified RF module

California Eastern Labs (CEL) 802.15.4 RF Transceiver

2.405GHz - 2.48GHz Spread Spectrum

20 dBm (100mW) Tx Power Output

+5dBm 8.5" rubber duck antenna 

Battery Requirements:  3 x AA (standard or re-chargable)

15+ hours active opertion

72+ hours idle (sleep-mode) operation 

 

PyroSure Controller £995

 

The PyroSure Digital Controller is housed in a rugged heavy duty ABS case with a solid aluminium control panel

 

One of the main features of the system is the easy to use touch screen with user friendly interfaces.

 

Cue selection and entry have never been easier with most functions offering defaults to speed processes up and make the system more self explanatory. The simple numeric key pad has 7 function keys used to speed up selection or avoid lengthy command processes.

 

Other features on the controller are an emergency stop button, shows can be restarted at the exact instant it was stopped, with or without music.

 

Arm key, which is supplemented by an on screen security code entry. All arm keys are identical, whilst each security code is unique - allocated by the system owner.

 

XLR connection for stereo output to a PA.

 

2 USB connectors for downloading firing script or supplementary 5v external power source.

 

Power pack consisting of 4 standard AA rechargeable batteries. For low temperature use at -20C see our special low temperature Industrial batteries.

 

A set of 2600 mah batteries can fire several shows. If you require several more hours of operation simply use an external 5V power pack and a USB cable. There is no need to sit with the control panel operating for hours, every aspect of the show can be verified in seconds and fired immediately.

 

The System uses one of the most advanced chip in the communications industry.

 

Network Set-up automatically scans 12 channels to avoid interference. Each channel has 65,000 network addresses available.

 

It has a range of up to 1.6 km using line of sight.

 

Fully encrypted transmission, the controller is capable of delivering data packages way beyond the requirement of a firing system.

 

Two chips are available; a North American version and an International version which is approved for use in the EU and Japan.

 

Digital 24-Cue Wireless Module £299

 

PyroSure Modules are compact and manufactured in extruded aluminium.

 

Each module communicates with the Controller, stores information and processes commands.

 

It has one function, to gather information on up to 24 cues and fire them exactly when required. In doing so, in the background, it relays information for up to 98 other modules in the network.

 

The LED display screen provides information on signal strength, battery power and available / connected cues.

 

Cue continuity can be checked simply by turning the module on which sends a 2 mah current through every port.

 

A temporary loss of signal will not affect the functioning of this self contained unit and is detectable by the Controller.

 

Power is supplied by only 4 AA 2000 mah rechargeable batteries providing hours of operating time. Embracing the latest engineering designs has allowed us to have this function, a massive lead acid is simply no longer a site requirement.

 

3 x 18000 uf capacitors are used to provide the fire power, producing 60 amps at 30v.

 

Each port can fire hundreds of standard igniters in one hit, upscaling to allow any module to fire many thousands of such igniters in one display across the 24 cues.

 

Accuracy of timings for firing cues is provided MOSFET switches. Every port has an individual power circuit, each controlled by a further master circuit.

 

Pulse time is fully automated from a standard 80 ms down to 10 ms when the time between cues in one module is as short as 0.01 second.

 

Each Module has cue addresses in 6 groups of 4 connectors A(1-4) - F(1-4).

 

Programming a Module is simply done by the main Controller unit transmitting a set of instructions in milliseconds. Confirmation from the Module that it has received the instructions is available.

 

Purchase UK version from Easypyro click here

 

FireOne XL4 Controller £3,300